Parts & Consumables
For all orders of Parts and Consumables, please contact the India Sales and Service team directly at: +91-22-27781011 / 12 / 13 or info@qd-india.com.
Quantity Included: 50 pairs
Snaps into brass half-tube sample holder (C130B) 4500-608.
Quantity Included: 5
Made to snap into the standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.
Quantity Included: Each
Quantity Included: Each
4mm wide.
Quantity Included: Each
VSM Sample rod flexure adapter for MPMS 3.
Quantity Included: Each
3.2 mm inner diameter.
Quantity Included: Each
Mounted in a quartz tube.
Quantity Included: Each
GGG crystal mounted on an MPMS3 quartz paddle 4500-604.
Quantity Included: Each
Used exclusively on MPMS 3 systems.
Quantity Included: Each
Quantity Included: Set of 10
17mm x 30mm foils
Quantity Included: Each
5mm wide
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 500
Quantity Included: Each
Used exclusively on MPMS 3 systems.
Quantity Included: Set of 100
Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.
Quantity Included: Set of 100
Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.
Quantity Included: Each
Used to replace scroll tip seals for IDP-7 vacuum pump.
Quantity Included: Set of 3 Binders
Quantity Included: Each
Used to arbitrarily permute leads to user's experiment while it is in the system; also provides access for external electronics.
Quantity Included: Each
Usable on PPMS and MPMS but not on MPMS 3.
Quantity Included: Each
Includes one (1) Extraction Tool and one (1) Puck Adjustment Tool.
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Sealed bucket for liquid or air-sensitive samples.
Quantity Included: Each
Includes Torque chip support and small screwdriver.
Quantity Included: Each
Does not include any measurement stage / puck; Requires Sample Mounts (P104) or Heat Capacity pucks (P107B or P107E) for measurements.
Quantity Included: Each
Does not include Thermometer Shoe Assembly (P117C) or Heater Shoe Assembly (P117D)
Quantity Included: Each
Quantity Included: Each
voltage lead separated from the thermometer shoe
Quantity Included: Each
Quantity Included: Set of 30
Quantity Included: Set of 10
Quantity Included: Set of 3 shoes
Includes two (2) Thermometer Shoe Assemblies (P117C) and one (1) Heater Shoe Assembly (P117D).
Quantity Included: Each
Can be used with ACMS-II, MPMS-3 and the Large Bore VSM coils.
Quantity Included: Each
Uncalibrated puck.
Quantity Included: Each
Uncalibrated puck.
Quantity Included: Each
Uncalibrated puck. This puck is for use in PPMS DR systems (for DynaCool DR please order part 4085-280).
Quantity Included: Each
Uncalibrated puck. This puck is for use in DynaCool DR systems (for PPMS DR please order part 4085-264).
Quantity Included: Each
DR mounts are Au-plated silver; one edge is sanded to show this.
Quantity Included: Each
Quantity Included: Each
Uncalibrated puck.
Quantity Included: Each
Calibrated 6.3 mm bore VSM coilset.
Quantity Included: Each
inner diameter of blue tubes = 7.6mm
Quantity Included: Each
diameter of blue bearings = 7.6mm
Quantity Included: Each
VSM Sample rod flexure adapter for PPMS and VersaLab.
Quantity Included: 50 pairs
Snaps into brass half-tube sample holder (C130B) 4500-608.
Quantity Included: Each
3.2 mm inner diameter
Quantity Included: Each
4mm wide
Quantity Included: 5
Made to snap into the standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.
Quantity Included: Each
diameter of blue bearings = 10.3mm
Quantity Included: Each
inner diameter of blue tubes = 10.3mm
Quantity Included: Each
4.8 mm inner diameter
Quantity Included: Each
Sample holder optimized for securing thin film samples
Quantity Included: Each
For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples and copper foil coupons.
Quantity Included: Each
Quantity Included: Set of 10
12mm x 30mm foils
Quantity Included: Each
3.5mm wide
Quantity Included: Set of 500
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 3
Quantity Included: Set of 2
for in-plane sample rotation
Quantity Included: Each
max torque ~1e-4 N-m
Quantity Included: Each
Fully calibrated at Quantum Design.
Quantity Included: Each
max torque ~1e-5 N-m
Quantity Included: Each
Fully calibrated at Quantum Design.
Quantity Included: Set of 3
Quantity Included: Set of 3
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 3
Felt strip pads for centering rings of VSM coilset.
Quantity Included: Set of 100
Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.
Quantity Included: Set of 100
Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.
Quantity Included: Each
same size as Pd standard cylinder
Quantity Included: Each
Calibrated 6.3 mm bore VSM coilset.
Quantity Included: Each
diameter of blue bearings = 7.6mm
Quantity Included: Each
diameter of blue bearings = 10.3mm
Quantity Included: Each
Inner diameter of blue tubes = 7.6mm
Quantity Included: Each
VSM Sample rod flexure adapter for PPMS and VersaLab
Quantity Included: Each
Sample holder optimized for securing thin film samples.
Quantity Included: Each
Inner diameter of blue tubes = 10.3mm
Quantity Included: Each
For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples and copper foil coupons.
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 500
Quantity Included: Set of 3
Felt strip pads for centering rings of VSM coilset.
Quantity Included: Set of 100
Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.
Quantity Included: Set of 100
Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.
